| ADSL Compliance |
‧Full-rate ANSI T1.413 Issue 2
‧ITU G.992.1 (G.dmt) Annex A and B
‧Splitterless ITU G.992.2 (G.lite) specification
‧ITU G.994.1 (G.hs)
‧ITU G.992.3 (G.dmt / ADSL2)
‧ITU G.992.5 (ADSL2plus)
‧Supports splitterless ADSL implementation
‧Supports Dying Gasp |
| Interface |
‧4* 10/100 Base-TX Ethernet ports with RJ-45 connector
‧1* RJ-11 connector (2-wire)
‧Power jack
‧Reset button
‧On/Off switch |
| ATM |
‧Bridged IP over ATM (RFC 1483)
‧PPP over Ethernet (RFC 2516)
‧Multiprotocol Encapsulation over AAL5 (RFC 2684)
‧Supports up to 8 Virtual Channel Connections (VCCs)
‧Supports UBR, CBR, and VBR service classes
‧ATM Forum UNI 3.1/4.0 PVC
‧Support OAM F4/F5 look-back, AIS and RDI OAM cells |
| Management |
‧TFTP client and server
‧DHCP client and server
‧FTP server and client
‧Universal Plug and Play (UPnP) support
‧Web-based Graphical User Interface (GUI) enabling end-user device configuration
via HTTP
‧Update of boot image or configuration data via TFTP/ FTP
‧Syslog
‧Built-in Diagnostic Tools
‧SNMP MIB support |
| Router Features |
‧IP Alias
‧User Datagram Protocol (UDP)
‧Transmission Control Protocol (TCP)
‧Internet Control Message Protocol (ICMP)
‧Internet Group Management Protocol (IGMP)
‧PPP over PAP (RFC1334)
‧PPP over CHAP (RFC1994)
‧MIB II support (RFC1213)
‧Transparent bridging as specified in IEEE 802.1D
‧NAT (Network Address Translation)
‧Dynamic Host Configuration Protocol (DHCP)
‧Dynamic DNS support
‧Routing Information Protocol (RIP) v1 and v2 |
| Power supply |
‧External Power Adapter DC12V 1A |
| Environment |
‧Operating Temperature: 0°C ~ 50°C
‧Operating Humidity: 10%~85% (Non-Condensing) |
| Dimension |
‧140 * 107 * 29mm |
| Certifications |
‧FCC, CE |
